Wireless LAN part1

From Wikipedia, the free encyclopedia

A wireless LAN (WLAN) is a wireless local area network that links two or more computers or devices using spread-spectrum or OFDM modulation technology based to enable communication between devices in a limited area. This gives users the mobility to move around within a broad coverage area and still be connected to the network.

For the home user, wireless has become popular due to ease of installation, and location freedom with the gaining popularity of laptops. Public businesses such as coffee shops or malls have begun to offer wireless access to their customers; some are even provided as a free service. Large wireless network projects are being put up in many major cities: New York City, for instance, has begun a pilot program to cover all five boroughs of the city with wireless Internet access.

History

In 1970 Norman Abramson, professor at the University of Hawaii, developed the world’s first computer communication network using low-cost ham-like radios, named ALOHAnet. The bi-directional star topology of the system included seven computers deployed over four islands to communicate with the central computer on the Oahu Island without using phone lines.

"In 1979, F.R. Gfeller and U. Bapst published a paper in the IEEE Proceedings reporting an experimental wireless local area network using diffused infrared communications. Shortly thereafter, in 1980, P. Ferrert reported on an experimental application of a single code spread spectrum radio for wireless terminal communications in the IEEE National Telecommunications Conference. In 1984, a comparison between Infrared and CDMA spread spectrum communications for wireless office information networks was published by Kaveh Pahlavan in IEEE Computer Networking Symposium which appeared later in the IEEE Communication Society Magazine. In May 1985, the efforts of Marcus led the FCC to announce experimental ISM bands for commercial application of spread spectrum technology. Later on, M. Kavehrad reported on an experimental wireless PBX system using code division multiple access. These efforts prompted significant industrial activities in the development of a new generation of wireless local area networks and it updated several old discussions in the portable and mobile radio industry.

The first generation of wireless data modems was developed in the early 1980s by amateur radio operators, who commonly referred to this as packet radio. They added a voice band data communication modem, with data rates below 9600-bit/s, to an existing short distance radio system, typically in the two meter amateur band. The second generation of wireless modems was developed immediately after the FCC announcement in the experimental bands for non-military use of the spread spectrum technology. These modems provided data rates on the order of hundreds of kbit/s. The third generation of wireless modem then aimed at compatibility with the existing LANs with data rates on the order of Mbit/s. Several companies developed the third generation products with data rates above 1 Mbit/s and a couple of products had already been announced by the time of the first IEEE Workshop on Wireless LANs

"The first of the IEEE Workshops on Wireless LAN was held in 1991. At that time early wireless LAN products had just appeared in the market and the IEEE 802.11 committee had just started its activities to develop a standard for wireless LANs. The focus of that first workshop was evaluation of the alternative technologies. By 1996, the technology was relatively mature, a variety of applications had been identified and addressed and technologies that enable these applications were well understood. Chip sets aimed at wireless LAN implementations and applications, a key enabling technology for rapid market growth, were emerging in the market. Wireless LANs were being used in hospitals, stock exchanges, and other in building and campus settings for nomadic access, point-to-point LAN bridges, ad-hoc networking, and even larger applications through internetworking. The IEEE 802.11 standard and variants and alternatives, such as the wireless LAN interoperability forum and the European HiperLAN specification had made rapid progress, and the unlicensed PCS Unlicensed Personal Communications Services and the proposed SUPERNet, later on renamed as U-NII, bands also presented new opportunities."

Originally WLAN hardware was so expensive that it was only used as an alternative to cabled LAN in places where cabling was difficult or impossible. Early development included industry-specific solutions and proprietary protocols, but at the end of the 1990s these were replaced by standards, primarily the various versions of IEEE 802.11 (Wi-Fi). An alternative ATM-like 5 GHz standardized technology, HiperLAN/2, has so far not succeeded in the market, and with the release of the faster 54 Mbit/s 802.11a (5 GHz) and 802.11g (2.4 GHz) standards, almost certainly never will.

In November 2007, the Australian Commonwealth Scientific and Industrial Research Organisation (CSIRO) won a legal battle in the US federal court of Texas against Buffalo Technology which found the US manufacturer had failed to pay royalties on a US WLAN patent CSIRO had filed in 1996, however in September 2008, the Federal Circuit remanded the case back to district court[4]. CSIRO then engaged in legal action against fourteen other computer companies including Microsoft, Intel, Dell, Hewlett-Packard and Netgear who argued that the patent is invalid and should negate any royalties paid to CSIRO for WLAN-based products.[5] In 2009, these cases were settled out of court which may see billions in royalties flow to CSIRO. In a statement to the media, CSIRO Chief Excectutive Megan Clark said that "CSIRO will continue to defend intellectual property developed from research undertaken on behalf of the Australian taxpayer."

Benefits

The popularity of wireless LANs is a testament primarily to their convenience, cost efficiency, and ease of integration with other networks and network components. The majority of computers sold to consumers today come pre-equipped with all necessary wireless LAN technology. Benefits of wireless LANs include:

Convenience

• The wireless nature of such networks allows users to access network resources from nearly any convenient location within their primary networking environment (home or office). With the increasing saturation of laptop-style computers, this is particularly relevant.

Mobility

• With the emergence of public wireless networks, users can access the internet even outside their normal work environment. Most chain coffee shops, for example, offer their customers a wireless connection to the internet at little or no cost.

Productivity

• Users connected to a wireless network can maintain a nearly constant affiliation with their desired network as they move from place to place. For a business, this implies that an employee can potentially be more productive as his or her work can be accomplished from any convenient location. For example, a hospital or warehouse may implement Voice over WLAN applications that enable mobility and cost savings.

Deployment

• Initial setup of an infrastructure-based wireless network requires little more than a single access point. Wired networks, on the other hand, have the additional cost and complexity of actual physical cables being run to numerous locations (which can even be impossible for hard-to-reach locations within a building).

Expandability

• Wireless networks can serve a suddenly-increased number of clients with the existing equipment. In a wired network, additional clients would require additional wiring.

Cost

• Wireless networking hardware is at worst a modest increase from wired counterparts. This potentially increased cost is almost always more than outweighed by the savings in cost and labor associated to running physical cables.

Disadvantages

Wireless LAN technology, while replete with the conveniences and advantages described above, has its share of downfalls. For a given networking situation, wireless LANs may not be desirable for a number of reasons. Most of these have to do with the inherent limitations of the technology.

Security

• Wireless LAN transceivers are designed to serve computers throughout a structure with uninterrupted service using radio frequencies. Because of space and cost, the antennas typically present on wireless networking cards in the end computers are generally relatively poor. In order to properly receive signals using such limited antennas throughout even a modest area, the wireless LAN transceiver utilizes a fairly considerable amount of power. What this means is that not only can the wireless packets be intercepted by a nearby adversary's poorly-equipped computer, but more importantly, a user willing to spend a small amount of money on a good quality antenna can pick up packets at a remarkable distance; perhaps hundreds of times the radius as the typical user. In fact, there are even computer users dedicated to locating and sometimes even cracking into wireless networks, known as wardrivers. On a wired network, any adversary would first have to overcome the physical limitation of tapping into the actual wires, but this is not an issue with wireless packets. To combat this consideration, wireless networks users usually choose to utilize various encryption technologies available such as Wi-Fi Protected Access (WPA). Some of the older encryption methods, such as WEP are known to have weaknesses that a dedicated adversary can compromise. (See main article: Wireless security.)

Range

• The typical range of a common 802.11g network with standard equipment is on the order of tens of metres. While sufficient for a typical home, it will be insufficient in a larger structure. To obtain additional range, repeaters or additional access points will have to be purchased. Costs for these items can add up quickly. Other technologies are in the development phase, however, which feature increased range, hoping to render this disadvantage irrelevant. 

Reliability

• Like any radio frequency transmission, wireless networking signals are subject to a wide variety of interference, as well as complex propagation effects (such as multipath, or especially in this case Rician fading) that are beyond the control of the network administrator. Among the most insidious problems that can affect the stability and reliability of a wireless LAN are microwave ovens[8] and analog wireless transmitters such as baby monitors[9]. In the case of typical networks, modulation is achieved by complicated forms of phase-shift keying (PSK) or quadrature amplitude modulation (QAM), making interference and propagation effects all the more disturbing. As a result, important network resources such as servers are rarely connected wirelessly.

Speed

• The speed on most wireless networks (typically 1-108 Mbit/s) is reasonably slow compared to the slowest common wired networks (100 Mbit/s up to several Gbit/s). There are also performance issues caused by TCP and its built-in congestion avoidance. For most users, however, this observation is irrelevant since the speed bottleneck is not in the wireless routing but rather in the outside network connectivity itself. For example, the maximum ADSL throughput (usually 8 Mbit/s or less) offered by telecommunications companies to general-purpose customers is already far slower than the slowest wireless network to which it is typically connected. That is to say, in most environments, a wireless network running at its slowest speed is still faster than the internet connection serving it in the first place. However, in specialized environments, higher throughput through a wired network might be necessary. Newer standards such as 802.11n are addressing this limitation and will support peak throughput in the range of 100-200 Mbit/s.

Radio Emissions

• Wireless LANs utilize radio emissions for communication, which can cause interference in other devices and may have potentially deleterious effects on human health. See also electrosmog.